Log in

Sangfor Support Center

Table of Contents
< All Topics
Print

[ASW] Garbled code when logging into the switch using the console port

Posted
Updated
Byadmin
Views1

Problem Description

When debugging the sangfor switch, use the console to access and log in to the switch. The terminal software shows that the connection is normal but there is no output, as shown below

557605b7d8f9b89604.png (56.91 KB)

Solution

  1. Check whether the com port selected for terminal connection is correct
  2. Check whether the baud rate of the terminal is normal
  3. There is a problem with the console cable. Replace the console cable.

Original Link

https://support.sangfor.com.cn/cases/list?product_id=33&type=1&category_id=15521&isOpen=true