[Cyber Command] STA and Cyber Command version incompatibility causes STA to synchronize logs to Cyber Command abnormally
Problem Description
No data synchronization after STA accesses Cyber Command
Warning Very-Low Risk
Effective troubleshooting steps
- Check and confirm that the Cyber Command version is 3.0.66 and the STA version has been upgraded to 3.0.75
Root cause
Cyber Command standard versions 3.0.66 and 3.0.64N do not support probes above 64STA
solution
Cyber Command and STA must be upgraded to the corresponding recommended versions. For the recommended version link for STA to Cyber Command, please refer to click
Original Link
https://support.sangfor.com.cn/cases/list?product_id=24&type=1&category_id=27456&isOpen=true