Log in

Sangfor Support Center

Table of Contents
< All Topics
Print

[aCloud] When Clone VM and selecting the Run Location, an exclamation mark appears in front of a Node, and it is prompted that cloning the virtual machine to this Node will cause network disconnection

Posted
Updated
Byadmin
Views3

Problem Description

When Clone VM selecting Run Location, an exclamation mark appears in front of a Node, and a message is displayed indicating that cloning the virtual machine to this Node will cause network disconnection.

449495cf8c4c151287.png (67.06 KB)

Process –

  1. Hyper-converged console [physical machine], confirm that there are 6 Node;

    337755cf8c5fccc748.png (116.69 KB)
  2. Find the host with an Node and check [Details Status] – [Network] to confirm that the network port shows a normal connection;
  3. Check the Edge in the virtual machine network and confirm that the business Edge of the alarm host is not added to the Node exit.

    404535cf8c68c3d769.png (242.53 KB)

Solution

  1. Edit the Virtual Network in the virtual network and select Add;

    442055cf8c6d2946d6.png (24.43 KB)
  2. Add the Physical Host and network port, save and exit; clone again and confirm that Node status is normal.

    870325cf8c6f916516.png (17.29 KB)

Original Link

https://support.sangfor.com.cn/cases/list?product_id=33&type=1&category_id=15765&isOpen=true