Log in

Sangfor Support Center

Table of Contents
< All Topics
Print

[IAG] Active-active deployment cannot log in to the node due to virtual address anomaly

Posted
Updated
Byadmin
Views3

Problem Description

  1. Deploy the IAG master bridge and use the node bridge IP to log in to the host device that is always displayed.

Process——

  1. Capture packets on the host and node at the same time, and locate that the data first passes through the host and then to the node
  2. Check the host virtual address to confirm that the host virtual address is filled in with the node's bridge IP address

Root cause

  1. The virtual address of the host is filled in with the bridge IP address of the node

solution

Modify the host's virtual address solution

Original Link

https://support.sangfor.com.cn/cases/list?product_id=22&type=1&category_id=6648&isOpen=true