Log in

Sangfor Support Center

Table of Contents
< All Topics
Print

[IAG] All user traffic cannot be restricted – the flow control policy is configured but not enabled

Posted
Updated
Byadmin
Views1

Problem Description

The flow control policy is configured, and the flow of all users in the intranet is not restricted.

Process——

  1. In the traffic management status, it is found that flow control is not enabled, as shown in the following figure.

    622275b796d1949cf9.png (50.23 KB)

  2. Then look at [Flow Control Management] – [Channel Configuration] and it is not enabled.

    296175b796d6ca0a1b.png (89.65 KB)

Root cause

Although the flow control policy is configured, the flow control management is not enabled, so it does not take effect.

solution

Enabling flow control management in the channel configuration can limit the flow control rate.

Original Link

https://support.sangfor.com.cn/cases/list?product_id=22&type=1&category_id=6317&isOpen=true