[IAG] Bridge master-master mode deployment, static routing and other information are not synchronized (which configurations are not synchronized in master-master mode)

Problem Description

Two active-active bridges are deployed in dual-machine mode, and both machines and synchronization configuration are normal. A static route was added on the master control and manually synchronized to the standby machine. It was found that the static route was not synchronized, but the newly added users and policies were synchronized successfully.

Root cause

Due to the characteristics of the dual-machine master-master mode, the two machines do not synchronize the following configurations:
Firewall filtering rules, deployment mode, network port configuration, static routing, policy routing, DHCP, high availability, advanced options: centralized management, device name, certificate, SNMP, other options network protocol configuration, optical port bypass settings, serial number, configuration backup and recovery, packet capture tool, command console, Internet troubleshooting, virtual line configuration, VPN configuration, log center configuration, network monitoring connection
Note: Except for the above configurations, all other configurations will be synchronized

solution

The related asynchronous configuration needs to be manually configured on the master and nodes. That is: you need to manually add static routes to the node

Original Link

https://support.sangfor.com.cn/cases/list?product_id=22&type=1&category_id=6425&isOpen=true