Log in

Sangfor Support Center

Table of Contents
< All Topics
Print

[IAG] Bridge mode deployment, mapped servers cannot be accessed through IAG

Posted
Updated
Byadmin
Views2

Problem Description

IAG, 6.1, bridge mode deployment, the front-end device has port mapping, the mapped server cannot be accessed through our device, but can be accessed normally without going through the device

Warning Information

None

Process——

  1. Open intercept log, no log is generated
  2. Enable direct test and you can access it. The application service controls packet loss, and the application name is Remote Desktop.
  3. Add a new Internet access permission policy and allow the "Remote Desktop" application to access successfully.

solution

Add a new Internet access permission policy and allow the "Remote Desktop" application to be enabled

Suggestions and Conclusion

When the device is deployed in bridge mode, if access is normal without going through a certain application on the device, it is usually caused by policy. It is recommended that you open a direct connection (intercept logs) to locate the problem.

Original Link

https://support.sangfor.com.cn/cases/list?product_id=22&type=1&category_id=6534&isOpen=true