Log in

Sangfor Support Center

Table of Contents
< All Topics
Print

[IAG] Bypass deployment cannot audit server data

Posted
Updated
Byadmin
Views1

Problem Description

IAG bypass deployment is configured, data mirroring is done, but no data can be audited

Process——

  1. Check that all data has been mirrored

  2. The data is not encapsulated with a special protocol.

  3. IAG bypass deployment configuration is as shown in the figure:

    697985b2c5bcee296a.png (71.35 KB)

  4. The monitoring network segment is not configured, and all IPs configured in the server network segment

  5. Configure the monitoring server to a detailed server network segment.

Root cause

IAG bypass monitoring data direction is as shown in the figure:

846705d7774ca084c4.png (81.57 KB)
Currently, the monitoring network segment is configured as all, and the IP address of the monitoring server to access the monitoring server is LAN-LAN, which does not support identification and auditing.

solution

The monitoring server is modified to a detailed server network segment solution

Original Link

https://support.sangfor.com.cn/cases/list?product_id=22&type=1&category_id=5933&isOpen=true