Log in

Sangfor Support Center

Table of Contents
< All Topics
Print

[IAG] Configuration deployment mode prompts and free port IP conflicts: The free port address is manually configured

Posted
Updated
Byadmin
Views1

Problem Description

When redeploying the IAG deployment mode and modifying the wan port, it prompts that there is an IP conflict with the idle port

Warning Information


444685beaea95a2f23.png (49.11 KB)

Process——

  1. Check the network port configuration of the device and find that eth3 already has the wan port address that needs to be configured.
  2. After modifying the interface address, re-enter the deployment mode to modify the interface wan port address successfully

solution

Change the conflicting interface address to another address

Original Link

https://support.sangfor.com.cn/cases/list?product_id=22&type=1&category_id=6608&isOpen=true