Log in

Sangfor Support Center

Table of Contents
< All Topics
Print

[IAG] Deployment mode configuration submission “The DMZ port and the idle port IP conflict and cannot be in the same network segment. Please check!”

Posted
Updated
Byadmin
Views2

Problem Description

[IAG] Deployment mode configuration submission "The DMZ port and the idle port IP conflict and cannot be in the same network segment. Please check!"

Effective troubleshooting steps

  1. Check that the customer has changed the idle network port to the DMZ port. The original idle network port has an IP configured.
  2. You need to change the address of the idle network port to another network segment address and then go into deployment mode and change it back to solve the problem.

solution

You need to change the address of the idle network port to another network segment address and then go into deployment mode and change it back to solve the problem.

Original Link

https://support.sangfor.com.cn/cases/list?product_id=22&type=1&category_id=25116&isOpen=true