[IAG] EDR push configuration does not take effect–the node is not connected to EDR

Problem Description

The configured edr push does not take effect, and the push page does not pop up when accessing the http website

Process——

1. Check that the websites you visit are all http and there is no pop-up

2. Check that the EDR configuration is normal

3. Packet capture and analysis revealed that the data packets from the test computer did not pass through the IAG

4. Check the network configuration and find that the device is the master. The master is currently connected to the EDR normally, but the node is not connected.

5. Manual configuration of nodes is connected to EDR and then pushed normally after synchronization configuration

Root cause

The master will not be connected to EDR synchronously, but will be synchronized after connecting to EDR

solution

Manually add nodes to access EDR

Original Link

https://support.sangfor.com.cn/cases/list?product_id=22&type=1&category_id=7090&isOpen=true