【NGAF】Failed To Build Ipsec Vpn
Issue Description
Failed to establish VPN, log error:Please make sure [MYS-HDC] shared key of both parties are coherent!

Handling Process
Go to Nework > IPsecVPN > Phase I check Pre-Shared Key Configuration.
Root Cause
Pre-Shared Key of both parties are different.
Solution
Filled in the same key as shown below:

Suggestions
The problem of standard IPSEC docking is mostly due to the mismatch between the Pre-Shared Key of the Phase I or the Phase II of the two parties. Therefore, it is necessary to strictly check the configuration of both parties to see where the configurations of the two parties are. Not the same place.