Log in

Sangfor Support Center

Table of Contents
< All Topics
Print

[AF] AF 8.0.2 and above versions report errors when configuring multiple line load routing on a single physical interface

Posted
Updated
Byadmin
Views5

Problem Description

AF 8.0.2 and above versions report an error message when configuring multiple line load routing on a single Interfaces: Error: Interfaces selection conflict, only a single subInterfaces or a single VLAN Interfaces or multiple different physical interfaces can Interfaces

Warning Info


4775be0e618399f8.png (50.94 KB)

Root cause

Versions prior to 8.0.2 support configuring multiple line load Interfaces on a single physical interface, but versions 8.0.2 and later do not support configuring multiple line load routing on a single physical interfaceLayer 3

solution

Solution 1: When selecting a single subInterfaces or a single VLAN Interfaces, it is recommended to configure source address Policies Layer 3;
Solution 2: Select multiple different physical Interfaces to configure multi-line load Layer 3;

Original Link

https://support.sangfor.com.cn/cases/list?product_id=13&type=1&category_id=459&isOpen=true