[AF] AF red light is always on, and UNC error is reported when connected to the monitor for printing

Problem Description

The alarm light on the AF device is always on. The web interface cannot be logged in through the default Management Interface. The problem persists even after multiple power outages and Restart. The console port cannot be logged in either.

Effective troubleshooting steps

AF device VGA port connected to the monitor to see many System disk UNC printing

Root cause

System disk keeps printing UNC errors, indicating a System disk failure

solution

It is recommended to repair System disk

Original Link

https://support.sangfor.com.cn/cases/list?product_id=13&type=1&category_id=2038&isOpen=true