Log in

Sangfor Support Center

Table of Contents
< All Topics
Print

[AF] Check the application control policy log error: Hard disk is less than 32G and is not supported

Posted
Updated
Byadmin
Views1

Problem Description

The customer's Local needs to record application control Policies Logs, but the hard disk is smaller than 32G. When the application control Policies record is checked, an error message is displayed: SSD devices with a capacity of no more than 32G do not support recording application control permission logs!

Warning Info


QQ picture 20180710183737.jpg (46.68 KB)

Process——

  1. Check the built-in data center and the hard disk capacity is 30G.
  2. After upgrading the Local version to 7.5.1, configure the Syslog server to save the application control policy Policies. The Local Syslog server configuration is as follows:

    72765b48a4a66b4f7.png (91.34 KB)
    The third-party Syslog server can be configured according to its requirements. You only need to ensure that it can communicate with Local and that the port is consistent with that filled in on Local.

Root cause

Low-end model devices do not support recording allowed application control policy logs to the data center Policies to small disk capacity. Please contact local sales for specific performance recommendations of the equipment.

solution

It is recommended to use a Syslog server to record application control Policies.

Suggestions and Conclusion

It is recommended to upgrade the Local version to 7.5.1 and use a Syslog server to save application control policy logs.

Original Link

https://support.sangfor.com.cn/cases/list?product_id=13&type=1&category_id=104&isOpen=true