Log in

Sangfor Support Center

Table of Contents
< All Topics
Print

【NGAF】Failed to apply bandwidth management based on network object(multiple IPs)

Posted
Updated
Byalvin.chia@sangfor.com
Views5

Issue Description

Failed to apply bandwidth management based on network object(multiple IPs)

Handling Process

  1. Configured bandwidth management over multiple IPs(added into the same network object) to retrict the bandwidth usage, however only 1 IP bandwidth is restricted.

  2. Configure separate bandwidth channel for each IP, found no problem.

  3. Confirmed the traffic have passing through NGAF and no whitelist/exclusion on respective IP.

Root Cause

Known bug on bandwidth management module.

Solution

Install KB-AF-20210701-FixTrafficControlMatchIssue according to NGAF firmware version.