Introduction

The Report Center can collect, store, and display data on Sangfor Virtual Desktop Controller (VDC) and Sangfor Virtualization Management Platform (VMP). It can be used for asset management, security policy audits, file export audits, and log audits for aDesk VDI clusters.

Configuration

Report Center Installation

Prerequisites

The Report Center supports installation on Windows Server 2012, 2016, 2019, and 2022. Before installing the Report Center, you must install Windows Server, which can be installed on HCI or the physical server. The server specifications are as follows:

OS Version	Functional Requirements	Deployment Conditions	CPU	RAM	Disk
Windows Server 2012 (64-bit)	Do not audit file content	1. Install Server 2022 on HCI. 2. Install Server 2022 on the physical server.	>= 4 Core	>=8 GB	>= 500 GB
Windows Server 2012 (64-bit)	Audit file content	Install Server 2022 on the physical server.	>= 4 Core	>=8 GB	>= 1 TB

Precautions

The Report Center can process data from only one HCI cluster. If the Report Center is configured on a VDC console with multiple HCIs, only the data from the first HCI on the VDC console can be displayed in the Report Center.

Procedure

1. Download the Report Center installation package. After downloading, upload the installation package to the prepared Windows Server.
   https://community.sangfor.com/plugin.php?id=service:download&action=view&fid=8#/75/all

2. After the upload process is complete, click the installation package to start the installation, then click Next and follow the wizard to install it.

3. Check whether the installation is successful.

• Access the Report Center in the Windows Server operating system at http://127.0.0.1/.

• Access the Report Center from outside the server using the Windows Server IP address, such as https://192.200.20.118.

Note:

Login Browser Requirements:

• Chrome 42 or above version.

• Firefox 18 or above version.

• IE 10 or above version.

4. The login credentials and administrator types are as follows:

Account Type	Username	Password
Audit administrator	auditadmin	auditadmin
System administrator	sysadmin	sysadmin

Integrating Report Center with VDC

Function

The File Export Audit feature and advanced O&M requirements of aDesk VDI rely on the Report Center. The main purpose of this module is to integrate the Report Center with VDC and establish an association between VDC and the Report Center.

Prerequisites

The LAN device allows communication between VDC and the Report Center IP address on TCP port 443.

Precautions

One VDC cluster can only integrate with one Report Center, and one Report Center can only integrate with one VDC cluster.

Procedure

1. Log in to the VDC console and go to System > Integrated Platforms> Report Center. Select Enable Report Center and enter the corresponding IP Address. After entering the IP address, click the Test Connectivity option to verify if the Report Center is reachable. Click save.

2. After saving the configuration, once the Status of the Report Center changes to On, it indicates that the VDC has successfully integrated with the Report Center.