Log in

Sangfor Support Center

Table of Contents
< All Topics
Print

【aDesk-VMP】VMP host is stuck at the pmxcfs Service when starting up

Posted
Updated
Byadmin
Views1

Problem Description

VMP startup stuck near pmxcfs: Start (/sf/cluster/bin/pmxcfs) ok! 15529

Effective troubleshooting steps

  1. Check whether the server management port administration and management is Settings with aggregation, because Cluster communication Error the aggregation case may cause the host startup to be stuck in pmxcf.

Root cause

The administration and management port is Cluster stuck Error. Mon are generally two possible Cause:

  1. Cause to the administration and management port switch network.
  2. Caused by a problem with the administration and management port aggregation Mode.

solution

Only Mon network cable is left on the administration and management port of the abnormal host so that the host can start normally after the Cluster communication Connected.

Suggestions and Conclusion

Mon this problem is caused by Error host administration and management network. If administration and management port is an aggregation port, it is recommended to unplug a administration and management network cable and restart Mon computer to see if it Connected start normally. If it is still Error, connect the network cable that was just unplugged, unplug another network cable and restart Mon computer to try again.

Original Link

https://support.sangfor.com.cn/cases/list?product_id=26&type=1&category_id=12288&isOpen=true