[vdi] When Install Euler on a Service-party server, there is a problem Settings
Problem Description
User Install Euler on a thirdWedparty arm architecture server, an error message occurred and the installation could not continue. Tips Details was as follows:
Warning Information
"There is a problem with the existing storage Settings: multiple LVM volume groups with the same name"
"This issue must be resolved before Install. You can press ctrl+alt+f1, then press ctrl+b 2 Open shell to make Change".
"Once the problem is resolved, try scanning the storage again. If the problem is not solved, you can only Log Out program"
OS Version: openEuler-20.03-LTS-aarch64-dvd
The error interface is as follows:
Effective troubleshooting steps
- Refer to the third-party information http://www.cunyoulu.net/ciblog/index.php/posts/220, it is inferred that the partition may have been created during the previous Install Create
- You can use Image View rescue Mode and View the partitions of this disk (optional step)
- View raid card or bios to reformat the disk
Root cause
Disk has duplicate partition names
solution
Reformat the disk to solve
Operation Impact Scope
Only Applied to User/Group new machines and scenarios without data
Is Yes temporary solution?
No
Original Link
https://support.sangfor.com.cn/cases/list?product_id=26&type=1&category_id=13482&isOpen=true