Issue Description

WANO built-up Acceleration connection, but unable to build up Reverse Acceleration.
Below is the sample screenshot of fail to build up Reverse Acceleration,

The Reverse User shows empty, which means fail to build up Reverse Acceleration.

Handling Process

1. Check from the System Log from both side, nothing major or relevant logs show
   

2. Ensure the [Reverse Acceleration] is enabled
   

3. Try to build an Acceleration Tunnel from Server side connect to Client side to ensure the traffic flow is normal between both side, but both side shows fail to build up Reverse Acceleration
   

Root Cause

From the Server side found out that there is a Acceleration policy that connect back to the Client side.
In this case, supposed that the connection is build from Client side to Server side, but from the Server side found out there is a policy that connect back to the Client side.
Although it is disabled, but it will also cause this issue.

Solution

Remove the policy from the Server side, the Reverse Acceleration will be built-up automatically