Issue Description

Traffic not able to pass-through device when connected to ETH0 and ETH2.
New deployment, deploy as bridge

Error/Warning Information

Handling Process

1. Not able to access to device after deployment
2. Due to affected client network, removed the device from network
3. Check deployment, the configured bridge pair is eth1 and eth3
   
   4.However, the physical cable connected is eth0 and eth2 as this is the default bridge pair

Root Cause

Wrongly configured bridge pair on the interface

Solution

Change the configured bridge pair from eth1 and eth3 to eth0 and eth2

Suggestion

Always check the configuration before deploying the device